Please wait while the page loads...

Lexus NX 200t Check Engine Light Flashing

Although there are copious capability causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are a lot commonplace causes incorporating something as distinguishable as a loose gas cap. Other commonplace reasons for a Check Engine Light are damaged oxygen sensor, dirty mass airflow sensor, faulty head gasket, a malfunction with the fuel injection system, faulty emissions control part, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Lexus Certified Technicians and the certified service protocol to isolate the root problem and repair it as crucial to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Lexus issue was fixed.

Every Lexus NX 200t was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the car on its laborious systems. The sensors are usually detecting conditions while sending data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light lights up telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what definitely is wrong nor what to do about it. That’s where we come in; Lexus of Greenville provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Exceedingly Qualified Service mechanical.

Is it safe to drive your Lexus NX 200t with the check engine light on?

If the check engine light is flashing, this means that there is a strict issue and it is recommended to service your Lexus NX 200t urgently. This question is not very commonplace because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is constantly indicated by a dependable glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more scrupulous problem. Call the consultants at Lexus of Greenville by dialing 8647547106 so you can describe the issues. Or lower your speed and bring your Lexus to our certified mechanics as soon as available.

How much does it cost to get the engine light checked?

The average cost for a check engine light diagnosis & testing is continuously between $88 and $111. The favorable news, Lexus of Greenville offers complimentary multi-point inspections and free diagnostics, in most cases, to aid suggest the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not subsequently tightened to a more precarious failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it favorable to get the plausible code reading and diagnosis.

Lexus NX 200t Check Engine Light

A glaring light indicates that the problem is dangerous and if not taken care of swiftly may result in big damage to the vehicle. If the check engine light in your Lexus NX 200t starts glaring, that means that the problem needs immediate attention and your Lexus should be brought in swiftly. This flashing light ordinarily indicates a rigid engine misfire allowing unused fuel to be ditched into the exhaust system. There it can swiftly raise the temperature of the catalytic converter to a point where damage is feasible, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can specifically be the cause. A destructive, aged or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to commute, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very expensive repair. If your check engine light is flashing, please contact our team of automotive consultants at Lexus of Greenville quickly by calling 8647547106.

What Does the Check Engine Light Mean?

One of the most commonly misunderstood lights or indicators in your Lexus NX 200t is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in several other ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light lights up in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your Lexus NX 200t. Some of these include shifting automatic transmissions controlling engine speed, ignition timing, and implementing stability control, just to name a few. With that being said, the check engine light can indicate a assortment of distinct things. It can be as conspicuous as your gas cap being loose or as applicable as engine knocking. If your check engine light is on in your Lexus NX 200t, contact Lexus of Greenville. Contact Lexus of Greenville today! Our Lexus service department can aid you find out what code is turning your check engine light on or diagnose why your check engine light is flashing.

Will the check engine light reset itself?

The check engine light on your Lexus NX 200t will usually shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going great, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your Lexus NX 200t light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to bring it in to Lexus of Greenville so the light and code can be double-checked and reset.

What could cause the check engine light to come on in a Lexus NX 200t?

When your check engine light comes on, this could be as plausible as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a important problem that could cause important break to your engine and come with a vast repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow typically means something less important but a flashing check engine light expresses that your vehicle’s engine is in important trouble and service is essential quickly. If your check engine light is flashing in your Lexus NX 200t, we extremely recommend not to travel to work the vehicle and schedule Lexus service today. Below is a list of the most plausible reasons your check engine light can come on:

  • New Spark Plugs or Plug Wires are necessary for your Lexus NX 200t. The spark plugs are the part of your engine that ignites the air/fuel collection in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are destructive or old, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, best to more expensive repairs.
  • Your catalytic converter is destructive or going destructive. The catalytic converter is a part of your Lexus NX 200t’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Lexus of Greenville offers a complimentary multi-point inspection with every Lexus service. If you have an issue with your catalytic converter and don't get it repaired, your Lexus NX 200t will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause back-up problems from overheating.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Lexus NX 200t is what determines how much fuel is necessary to run your engine efficiently by measuring the deposit of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to authentic changes, like altitude. If your Lexus NX 200t is having trouble starting, idling rough or has a hasty change in the position of the throttle pedal, this could be a sign of a destructive mass airflow sensor.
  • The battery is meager or dead. The battery in your Lexus NX 200t is every critical. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a few decades ago, and they don't really require maintenance. The price of a new one depends on the type of Lexus you commute, but check our current service coupons and specials.
  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, admitted as the O2 sensor, measures the deposit of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less adequate when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your Lexus NX 200t's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to suggest the right collection of air and fuel that enters the cylinders in your engine. A destructive O2 sensor can also cause a car to fail an emissions test.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or back-up item can wreak havoc on your Lexus NX 200t if it’s not installed properly. These aftermarket aspects and accessories can deposit the battery, trigger the check engine light, or even prevent the vehicle from starting. If these issues sound admitted, bring your NX 200t to Lexus and have our team of certified mechanics ensure that your aftermarket items were installed perfectly and aren't causing any issue. Getting accessories, especially aftermarket parts and accessories, or using OEM aspects earliest place might cost a little bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.
  • Your Lexus NX 200t has a vacuum leak. Every Lexus NX 200t has a vacuum system that performs a extensive variety of functions. The vacuum system also helps lower damaging emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can barren out and crack, especially if they’re exposed to forceful heat or extreme chilly.
  • One of the most ordinary and copious cause is that your Lexus NX 200t gas cap is loose, damaged or missing. The gas cap for your Lexus NX 200t serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a destructive fuel cap? If your gas cap is old or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on expeditiously after you put gas in your Lexus NX 200t, earliest thing you should check is to make sure the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.

How many miles can you drive with the check engine light?

Since each check engine code has its own level of severity, it is difficult to predict how various miles you can commute with the warning light on. If you check engine light is twinkling, we recommend that you pull over and contact Lexus of Greenville to assist opt for if your vehicle is safe to commute in or if we recommend a tow truck. The safest bet is to decipher the code and then plan your strategy accordingly. It could be anything from a bad sensor to plug wires needing to be replaced.

Lexus NX 200t Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that little light on your vehicle’s dashboard quickly lights up, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also known as the OBD (on-board computer diagnostic system) in your NX 200t. There are hundreds of disparate codes that your check engine light can mean. While that sounds daunting, with a little patience, tackling considerable diagnostics will give you reasonable knowledge about your vehicle and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Unfortunately, definite and fitting vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of reasonable OBD codes, there are also hundreds of reasonable reasons for the light, including:

  • Transmission issues
  • Loose Gas Cap or Missing Gas Cap
  • Fuel and air metering systems problems
  • Computer output circuit issues
  • Old Battery
  • Bad Spark Plugs
  • Ignition system faults
  • Emissions controls issues
  • O2 Sensor

This is why it is exciting for someone who does not have assorted of automotive knowledge to not assume what a code means. When your check engine light comes on, you should get it checked out swiftly by a certified Lexus mechanic. Call Lexus of Greenville at 8647547106 today or schedule your check engine light service online today! If the engine light comes on due to a hazardous concern, you risk damaging your car further by not repairing the issue right away.

Check Engine Light Service Lexus NX 200t

What do you do when you’re driving along in your Lexus NX 200t and hastily, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Lexus owners, your heart sinks a scant because you have scant idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your Lexus NX 200t checked as soon as factual. Ignoring that warning could end up causing major damage to expensive engine components.

When your Lexus NX 200t's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t correct, a computer turns on your check engine light. This amber or yellow light is normally labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic scan tool that is used by our Lexus auto repair mechanics at Lexus of Greenville. There are also a number of comparatively inexpensive code readers that are designed for do-it-yourselfers, should you choose that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced mechanical to represent the issue and repair it.